Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 71 items
Shorten inspection time!
You can easily conduct tests by inserting the relay into the socket and simply pressing the start button on the screen. Multiple relays can be tested simultaneously, and the results for each measurement item will be displayed for each relay. The measurement of all items can be completed in under a few dozen seconds, contributing to the efficiency of operations.
Excellent accuracy and outstanding ease of use! An electric testing system that allows for quick setup.
The electric testing system "ACUMEN" offers exceptional accuracy for dynamic and static tests, along with unprecedented ease of use. These energy-efficient, electrically driven systems can be quickly installed while minimizing impact on the facility. 【Features】 - Exceptional accuracy for dynamic and static tests - Unprecedented ease of use - Quick installation while minimizing impact on the facility For more details, please contact us.
A variety of hydraulic servo test systems with different capacities and applications, along with a wealth of applications and fixtures!
This catalog introduces the hydraulic servo fatigue testing systems handled by our company. It features a compact tabletop model "8872 (25 kN)" that meets the high demands of various static and dynamic testing requirements, as well as "8803 (500 kN)" and the controller electronics "8800MT." We also showcase a wealth of applications, so please take a look. 【Featured Products (Excerpt)】 ■ 8872 (25 kN) Fatigue Testing System ■ 8874 (25 kN/100 Nm) Fatigue Testing System ■ 8801 (100 kN) Fatigue Testing System ■ 8862 (100 kN) Low Cycle Fatigue Testing System ■ 8802 (250 kN) Fatigue Testing System *For more details, please refer to the PDF document or feel free to contact us.
Introducing application examples of material testing for parts and components of medical products, as well as final products.
Instron is a leading global supplier of mechanical testing systems suitable for tensile, compression, bending, peeling, tearing, friction, torsion, and fatigue tests. In many cases, mechanical testing of pharmaceutical products consists of tests for pill crushing, hard and flexible package testing, syringes, auto-injectors, and vials, as well as testing of drug delivery systems such as inhalers and transdermal patches. Mechanical testing of these products is particularly important to ensure characteristics such as appropriate dosage, drug delivery time, package integrity, and safety requirements of the package, such as child-proof opening mechanisms. 【Features】 ■ Reliability ■ Expertise ■ FDA Compliance ■ Space-saving Design *For more details, please refer to the PDF materials or feel free to contact us.
Reduce operator injuries! Generate results while improving the efficiency of the laboratory!
The "AT2XY Stage" is an automatic XY testing system suitable for testing medical products, syringes, small electronic devices, keypads, and pharmaceutical tablets. It tests multiple specimens without the intervention of an operator. This reduces testing time and allows for quicker provision of the data necessary for product development and production. It is designed to repeatedly conduct the same tests, such as compression, tensile, and bending tests on devices and electronic equipment. 【Features】 ■ Increased testing processing capacity ■ Effective use of operator time ■ Improved repeatability ■ Enhanced safety and ergonomics *For more details, please refer to the PDF materials or feel free to contact us.
Automating the measurement of specimen dimensions and the attachment and detachment of specimens! Up to 80 specimens can be installed.
The "AT3" and "AT3+" automatic testing systems are designed with an innovative approach to accommodate automatic tensile and bending tests for plastic specimens. They meet the testing requirements of standards such as ASTM D638, D790, ISO 527, and 178, and are equipped with many of the features found in the AT6 system, while being more space-efficient in terms of installation area. A protective cover is installed to isolate the system, which enhances safety by allowing operators to stay away from the testing area and effectively eliminates repetitive actions associated with manual testing, thereby improving the ergonomics of the testing area. 【Features】 ■ 3-axis actuators automate the measurement of specimen dimensions and the loading/unloading process ■ Removable storage rack can accommodate up to 80 specimens ■ Automatic measurement of specimen dimensions ■ Improved repeatability and reproducibility of tests and results *For more details, please refer to the related links or feel free to contact us.
Providing a complete testing solution to meet the needs of advanced materials and components testing!
The 8801 and 8802 hydraulic servo test systems meet the demanding requirements of static and dynamic testing. They provide a complete testing solution to meet the needs of advanced materials and components, and are suitable for quasi-static, high/low cycle fatigue, thermomechanical fatigue, and fracture mechanics testing. Both systems are highly versatile and reliable, capable of installation in any laboratory environment due to their size flexibility, without the need for floor reinforcement or ceiling height adjustments. 【Common Features (Partial)】 ■ Hydraulic configuration and dynamic performance can be selected according to application ■ T-slot base for further versatility and component testing, with optional table sizes available for specific applications ■ Standard equipment includes an adjustable upper crosshead with hydraulic lift and locking mechanism for easy adjustment of the test space ■ Rigid base tuning ■ High rigidity, precisely adjusted load frame *For more details, please refer to the related links or feel free to contact us.
It is a hydraulic servo fatigue testing system capable of conducting powerful static and dynamic tests on specimens up to 5000 kN.
Instron's high-capacity system is a hydraulic servo fatigue testing system that performs powerful static and dynamic tests on specimens up to 5000 kN. These testing machines utilize the same software, electronics, and interface as all of our general-purpose hydraulic fatigue testing machines, ensuring continuity and a consistent experience across your laboratory's testing equipment. Additionally, we provide support from dedicated project engineers who design and manufacture high-capacity testing machines and accessories to meet your needs. 【Common Features (Partial)】 ■ Hydraulic configurations and dynamic performance can be selected according to application ■ T-slot base for further versatility and component testing, with optional table sizes available for specific applications ■ Standard equipment includes an adjustable upper crosshead with hydraulic lift and locking mechanism to facilitate adjustment of the testing space ■ Patented Dynacell advanced load cell technology for faster testing and to minimize errors due to inertial effects *For more details, please refer to the related links or feel free to contact us.
Easy reliability evaluation! Small-scale EMS testing system
This is an EMS (radiated immunity) test device that evaluates whether the EUT (equipment under test) will malfunction due to surrounding electromagnetic waves.
![[Application Case] Introduction of MR2300 User Case](https://image.www.ipros.com/public/product/image/e5e/2000109592/IPROS04558264294255925979.jpeg?w=280&h=280)
Japan Cash Machine Co., Ltd., which manufactures currency processing equipment and other related products.
At Japan Cash Machine Co., Ltd. (JCM), we manufacture and sell currency processing equipment, financial-related devices, cash registers, and gaming-related equipment. Our currency processing machines are used in over 110 currencies worldwide, and we hold a dominant market share in the North American and European gaming markets. We have cleared all the stringent regulations specific to the industry and obtained numerous licenses. JCM has become synonymous with casino banknote validators, leveraging our local support capabilities as an advantage in the global market. Our MR2300 EMI testing system is chosen by customers leading the industry. For more details, please contact us or refer to our catalog.
![[Application Example] OTA Testing Solutions in IoT](https://image.www.ipros.com/public/product/image/bbf/2000399494/IPROS22453320258650409656.jpeg?w=280&h=280)
[Application Example] OTA Testing Solution in IoT (Throughput Testing)
Our company provides a system that combines electronic programmable attenuators and shielded boxes as an OTA testing solution compatible with various wireless communication standards, including WiFi, Bluetooth, and cellular. As IoT devices (things) become more diverse, OTA (Over the Air) testing is necessary for evaluating wireless performance. In OTA testing, these "things" connect wirelessly, requiring a radio-independent space (shielded environment) that does not affect the existing wireless environment and is not influenced by it. 【Solution】 ■ Example test items: 1-to-1 throughput testing system - Throughput - Device interoperability - Noise resistance - Directional characteristics *For more details, please refer to the PDF document or feel free to contact us. 【System Configuration】 ■ Programmable attenuator ■ Shielded box ■ Attenuation data creation and control software & trigger box ■ Various antennas ■ Various cables *For more details, please refer to the PDF document or feel free to contact us.
It is possible to conduct EMC (EMI + EMS) testing.
●A system that combines the MR2300 for EMI testing and the MR2350 for EMS testing. ●The PC software is MAS240/440/540. Since the RF shielded chamber and wideband antenna are common for MR2300 and MR2350, MR2400 is more affordable as a result. 【EMI Testing System MR2300】 A total EMI testing system for precompliance to measure radiated and conducted interference noise. 【EMS Testing System MR2350】 A precompliance EMS testing system for radiated immunity testing (IEC/EN61000-4-3).
[Application Example] By combining other companies' LISN and MSA series, it is possible to conduct conducted EMI tests for DC power supplies and three-phase power supplies.
The MR2150, a pre-compliance system for conducted EMI testing using MICRONIX's EMI measurement spectrum analyzer and signal analyzer, can utilize not only the MICRONIX MPW201B as the LISN but also LISNs from other manufacturers. By using LISNs from other manufacturers, the MR2150 can be used for products with DC power supplies, three-phase power supplies, and power supplies of 250V and 15A or more. 【Product Introduction】 ■ Conducted EMI Testing System MR2150 *For more details, please refer to the PDF materials or feel free to contact us.*
Technical Data: Simple EMI Test System "EMI Total Test System MR2300"
■Conducted EMI Test System MR2150 A pre-compliance system for conducted EMI (noise terminal voltage) testing. By using this system for debugging evaluation before conducting the official tests at a certified EMC site, significant reductions in development costs can be achieved. ■Total EMI Test System MR2300 Ideal for preliminary compliance testing ("Pre-compliance") for official EMI tests. This is an integrated system that combines our spectrum analyzer technology, anechoic chamber technology, and antenna technology. ■EMS Test System MR2350 A pre-compliance EMS test system for radiated immunity testing (IEC/EN61000-4-3). *For more details, please refer to the PDF materials or feel free to contact us.
[Technical Data] EMI Test System MR2300 / Shielded Room MY5410
■EMI Testing System MR2300 Ideal for preliminary compliance testing "Pre-compliance" for official EMI tests. This is an integrated system that combines our spectrum analyzer technology, anechoic chamber technology, and antenna technology. ■Anechoic Chamber/Shielded Box MY5410 An anechoic chamber optimal for large-scale EMI testing. It comes standard with a turntable with a diameter of 756mm and a load capacity of 100kg, suitable for large EUTs. *For more details, please refer to the PDF document or feel free to contact us. The MR2300/MY5410 has been developed for pre-compliance use. This enables the measurement of harmonics from switching power supplies in the 40-100MHz range, which was previously difficult. Below are the measurement results obtained with the MR2300/MY5410, compared with measurements conducted in a 10m anechoic chamber equipped with equivalent facilities using the 3m method.
Mainly suitable for production lines! Customization according to testing environments is also possible.
The "ME8901" is a system for communication after installing the ETC on-board unit in the vehicle. It is based on our "DSRC Roadside System ME9300." By connecting each device and connecting the dedicated AC adapter for the modified ME9302 to the power supply, the power will turn ON, and the scenario recorded internally will automatically start, allowing the test to begin. The test is initiated by pulling the tether switch. Customization according to your testing environment is also possible. Please contact us for more details. 【System Configuration】 ■ Antenna Unit: ME9301 modified ■ Interface Box Unit: ME9302 modified ■ Connection Cable: ME9303 ■ Tether Switch ■ Switch Cable (connected to the DI connector of ME9302 modified) ■ Lamp ■ Lamp Cable (connected to the DO connector of ME9302 modified) * For more details, please refer to the PDF materials or feel free to contact us.
The fastest test speed in the industry, the highest test level in the industry, the highest bias voltage in the industry, and the most user-friendly experience in the industry.
1. The LCR test parameters have been changed from the original two parameters to a display of four parameters, combining LCR measurement display and sorting display. 2. The LCR test incorporates settings for nominal values and reference values, making it easier for customers to understand and use. Cancel the auxiliary file and cancel the secondary parameter file. 3. The frequency, level, offset, function, and delay of each point in the list scan can be individually set to meet the needs of most customers. 4. LCR curve scan split screen display. 5. Convenient operation and intuitive display. Handler setting interface. In the transformer scan handler sorting mode setting, it can provide up to 30 sorting signal outputs. 6. When setting pins in the past, if pins need to be connected in series and parallel, it is necessary to enter different subpages. 7. The setting of the test conditions for the compressor is more concise and convenient. For the related parameters of Lx, it is necessary to enter 6 to 7 different subpages.
Ideal for network trans scanning tests, comprehensive characteristic analysis, and more.
Built-in bias power supply of 0-100mA/0-10V, maximum test speed of 75 times per second, improved DCR testing function, basic accuracy of 0.05%.
Ideal for non-destructive insulation and quality testing of electrical components (VDE 0110-1, EN 50178, IEC 60270, IEC 60060, etc.).
The TPP-type partial discharge testing system is used for non-destructive insulation and quality testing of electrical components (such as VDE 0110-1, EN 50178, IEC 60270, IEC 60060, etc.). This testing set enables testing in development, production, and quality assurance: ● The partial discharge measurement device (TMG) integrates the measurement of effective voltage and peak voltage, as well as current measurement. ● Shielded PD-free high voltage section ● Control unit with electronic overcurrent shutdown (STE) The standard test set from MPS supports test voltages from 3 to 20 kV. For voltages above this, please inquire. Options include: ● Current measurement through the test specimen ● Built-in high voltage partial discharge pulse calibrator (TPK-H) ● Measurement of DC voltage and current ● High voltage switch for measuring multiple test items
![[Case Study] MTS Bionix Desktop Axial Servo Hydraulic Testing System](https://image.www.ipros.com/public/product/image/960/2000119842/IPROS2671803800903620246.jpg?w=280&h=280)
We are helping to pursue next-generation vertebral bone cement.
A team of 20 functional materials scientists at Uppsala University’s Faculty of Science and Technology in Uppsala, Sweden, is conducting various research on biomaterials and is currently focusing on research related to bone cement. Uppsala University has partnered with MTS to support bone cement research and has incorporated the MTS Model 858 Bionix tabletop axial servo hydraulic testing system into its functional materials science testing lab. By combining this system with the MTS Bionix EnviroBath environmental simulation system, it has become possible to apply various loads simultaneously to bone cement in a saline solution maintained at human body temperature. As a result, they successfully replicated the loads and conditions that the cement injected into a patient’s body would ultimately experience long after surgery. Customers have stated that with the introduction of the MTS Bionix testing solutions, they can dedicate more time to focusing on new formulations without worrying about the performance of the testing system or the reliability of the test data. For more details, please contact us or refer to the catalog.
![[Case Study] Landmark Road Frame and Test Suite](https://image.www.ipros.com/public/product/image/2f8/2000119869/IPROS6355804076779576260.jpg?w=280&h=280)
We are assisting F1 teams through advanced software variable operations.
Formula One test engineers face some of the most demanding testing challenges in the world. For the UK-based Caterham F1 team, which entered the competition in 2010, conducting fast and flexible mechanical tests from the very beginning has been absolutely essential for the team's success. When it came time to select testing equipment for the newly completed Caterham F1 team's test lab, the test team leader chose MTS. Having used MTS's control systems and load frames for many years, he was already well acquainted with their performance. He was confident that MTS's hardware would provide the speed, accuracy, and flexibility his test team needed, enabling the continuous improvement of the Formula One team. Additionally, MTS TestSuite software brought competitiveness to the team in the high-pressure, quick-results environment characteristic of Formula One testing. For more details, please contact us or refer to the catalog.
![[Case Study] Shell Element Test System Upgrade](https://image.www.ipros.com/public/product/image/ea7/2000119916/IPROS4606496536575098029.jpg?w=280&h=280)
The expertise and technology of MTS played a crucial role in the success of the upgrade.
Professor Evan Bentz from the University of Toronto and a research group from the Mark Hagin Structural Research Institute are conducting cutting-edge research on the properties of reinforced concrete under harsh conditions. With recent significant advances in concrete materials science, the engineers at the institute began to feel the limitations of their research tool, the Shell Element Test (SET) system. They believed that to successfully upgrade the SET system, they needed a vendor who could first clarify what was possible, and then another vendor to implement it. They found a manufacturer that could achieve both simultaneously: MTS. By early 2010, the upgrade of the SET system was completed, and this static testing system effectively transformed into a dynamic testing system with enhanced durability and performance. The upgraded SET system now allows for simulations that closely resemble the actual operating conditions of today’s reinforced concrete structures. For more details, please contact us or refer to the catalog.
![[Case Study] A Testing Lab Specialized in Orthopedic Devices for the Spine](https://image.www.ipros.com/public/product/image/6da/2000119938/IPROS3526644857804457529.jpg?w=280&h=280)
High-precision long-term wear and fatigue testing of the lumbar spine and cervical region! Capable of mounting six test specimens, providing a statistically valid sample size.
We have prepared a module that allows for high-precision long-term wear and fatigue testing of both lumbar and cervical vertebrae in the lab, and also accommodates the important requirement of SpineServ for multiple test specimens by allowing the attachment of six test specimens. The shaker can uniformly apply bending, lateral bending, and axial rotation motions simultaneously to all six test specimens. *For more details, please contact us or refer to the catalog.*
![[Case Study] Addition of Step-Down Gearbox](https://image.www.ipros.com/public/product/image/d79/2000119978/IPROS1354617103726023985.jpg?w=280&h=280)
We support the steady transition from OEM testing facilities to contracted testing labs.
Toyota Motorsport GmbH (TMG), based in Cologne, Germany, has utilized a wide range of high-performance testing equipment from MTS Systems Corporation since 2001 to meet the needs of its Formula One vehicle development. In 2009, TMG made the formal decision to make its testing capabilities and the expertise of its dedicated staff available to external customers. Instead of investing time and money into a new testing system, TMG explored ways to extend the versatility of its existing testing systems by modifying software and hardware. Over several weeks, TMG and MTS worked closely together to complete the technical modifications across the facility. A key modification was the addition of a step-down gearbox to TMG's custom transmission testing system. This was aimed at improving the accuracy of test lab evaluations by replicating the loads, pressures, and operating temperatures present in the gearbox environment. MTS was indispensable for the smooth transition from TMG's testing lab to the contracted testing facility. For more details, please contact us or refer to the catalog.
![[Case Study] Introduction of MTS Hydraulics Program](https://image.www.ipros.com/public/product/image/e25/2000119987/IPROS8192154128174429100.jpg?w=280&h=280)
It contributes to maintaining the accuracy of the equipment and the integrity of the test data at a very high level.
The George E. Brown Jr. Network for Earthquake Engineering Simulation (NEES) connects 14 earthquake research facilities across the United States through NEEShub, a user-demand-driven cyber infrastructure. A major challenge for NEES is the efficient maintenance and operation of mechanical testing and simulation testing systems used at member institutions. Efficient routine maintenance and calibration of testing systems are essential for consistently maintaining high levels of testing accuracy and system uptime. In 2005, MTS launched a comprehensive support program for member institutions that adopt MTS technology for seismic testing and simulation. The MTS Hydraulix program regularly monitors the cleanliness of the hydraulic fluid in testing systems as a means to prevent significant and costly mechanical issues in the future. MTS's certified calibration and adjustment services contribute to maintaining the accuracy of equipment and the integrity of test data at exceptionally high levels. For more details, please contact us or refer to the catalog.
![[Case Study] Upgrade of High-Temperature Material Testing Equipment](https://image.www.ipros.com/public/product/image/f80/2000120031/IPROS1169878035142135237.jpg?w=280&h=280)
We support UCF in conducting mechanical tests in extreme environments.
The University of Central Florida (UCF) in Orlando has built a reputation for high-quality education and technological innovation since its establishment in 1963. In particular, the MMAE program at the university has established solid partnerships over the years with global manufacturers such as Siemens Power Generation, Lockheed Martin, Pratt & Whitney, and Mitsubishi Power System, as well as institutions like the Kennedy Space Center. UCF has set a policy to expand its high-temperature materials testing facilities and make this field a cornerstone of research at the university. To enhance mechanical testing capabilities at high temperatures, it was necessary to equip a variety of instruments and tools, including load frames, control systems, and software, and a testing solution partner with expertise in integrating advanced systems was required. MTS was chosen for this purpose. Upgrading the materials characterization testing facilities in MMAE has brought significant benefits not only to students in the College of Engineering and Computer Science but also to UCF's commercial partners. For more details, please contact us or refer to the catalog.
![[Case Study] Introduction of Model 320 2-Poster Testing Equipment](https://image.www.ipros.com/public/product/image/a91/2000120033/IPROS1647554297291285811.jpg?w=280&h=280)
It contributes to maintaining the top position of one of the world's largest scooter manufacturers.
The Piaggio Group, represented by the Vespa brand, is a world-class manufacturer of motorized bicycles (mopeds), scooters, and motorcycles based in Pontedera, Italy, with an annual production of over 600,000 vehicles. Piaggio's seven brands are supported by 6,700 employees in 50 countries and five research and development centers. In November 2008, Piaggio introduced the MTS Model 320 two-poster testing system in its mechanical lab in Pontedera in close collaboration with MTS. This two-axis tire contact surface input simulator uses MTS RPC software to accurately and repeatedly reproduce loads caused by road surface inputs across the entire prototype vehicle, simulating loads and moments equivalent to test courses that include rough road testing. This allows the testing personnel to simulate conditions that a typical rider encounters during everyday driving, enabling them to obtain clear data on how the vehicle will ultimately perform after years of use. For more details, please contact us or refer to the catalog.
![[Case Study] Introduction of MTS Structural Fatigue Testing System](https://image.www.ipros.com/public/product/image/942/2000122010/IPROS5681893729325304383.JPG?w=280&h=280)
Providing major military aircraft manufacturers with the ability to quickly and safely dissipate energy from testing devices.
MTS provided support for incorporating the Active Load Abort (ALA) system into each test fixture used by Airbus Military for the Airbus A400M transport aircraft. The ALA technology is ideal for protecting test specimens, as it enhances control to remove loads from the structural testing system in the event of power outages or system interlocks. During such events, regardless of changes in pressure or the position of each shaker, the ALA system performs measurements and simultaneously reduces the loads of all shakers to a neutral state at both the software and hardware levels. Additionally, while lowering the hydraulic pressure on the specimen, an independent control system is activated in parallel with the load control system, taking into account the overall state of the test. This system detects faults on the control side and adjusts to ensure that loads are rapidly and evenly removed from the entire specimen. For more details, please contact us or refer to the catalog.
![[Case Study] Introduction of MTS Bionix® Axial Torsion Testing System](https://image.www.ipros.com/public/product/image/ef9/2000122014/IPROS1787193439148926781.JPG?w=280&h=280)
We support the implementation of translational research.
MTS supports the implementation of translational research necessary to bridge the gap between histochemistry and OR at the Human Soft Tissue Research Laboratory. MTS assisted Mr. Obopilwe in integrating the Bionix® torsion testing system, which features the FlexTest® digital controller and Multipurpose TestWare® application software. "The Bionix system allows for the precise application of loads and motions across various multi-axes and numerous cycles," says Mr. Obopilwe. "This capability is extremely helpful in assessing how much torsion or axial force a joint can withstand before failure. It has been particularly useful in evaluating new orthopedic surgeries related to the knee and ankle. For more information, please contact us or refer to the catalog."
![[Case Study] Introduction of MTS Material Testing System](https://image.www.ipros.com/public/product/image/d95/2000122023/IPROS8219252491673745712.JPG?w=280&h=280)
Designed and collaborated on a unique mechanical testing system when applying neutron scattering technology.
In-situ research includes temperature distribution, texture changes, stress growth, and drop in extremely high and low temperature operating environments. Additionally, the VULCAN system facilitates simultaneous characterization of dilatometry, weight, and microstructure, allowing for extremely accurate and detailed snapshots of the atomic state of materials at every stage. For more details, please contact us or refer to the catalog.
